Product Home
Architectural Connectivity
Cable Cubby Series
Power Modules Retractor Modules Installation Accessories AVEdge Accessories USB AV Connectivity Modules USB Power Modules Flex55 Enclosures Frames Modules - Power Modules – Pass-through Modules – Active Cable Cubby Enclosures with Control Cable Cubby TouchLink Pro Touchpanels Cable Cubby Button Panels AC Power Modules Retractor Modules Touchpanel Installation Accessories Button Panel Installation Accessories Cable Cubby Accessories HSA - Hideaway Surface Access Enclosures AAP / MAAP Modules AV Connectivity Module Selector Cable Cubby Builder Connectivity Builder AV Connectivity Mounting Frames Furniture Mount - AVEdge Furniture Mount – Cable Cubby Series Furniture Mount – Hideaway Surface Access Furniture Mount – Surface Mount Table Mount Kits Wall Mount – US Gang Wall Mount – Decorator-Style Wall Mount – EU/MK Rack Mount Floor Mount Wallplates Decorator-style Wallplates with Pass-through Connectors US-Gang Wallplates with Pass-through Connectors EU/MK Wallplates with Pass-through Connectors AV Connectivity Accessories
Cable Cubby 202
Cable Cubby 100 Cable Cubby 1202 Cable Cubby 1252 MS Cable Cubby 1402 Cable Cubby 202 Cable Cubby 500 Cable Cubby 650 UT Cable Cubby 700 Cable Cubby Drawer Cable Cubby F55 Cable Cubby F55 Edge Cable Cubby F55 UT

Pro

Cable Cubby 202

Cable Access Enclosure for AV Connectivity and AC Power

Key Features

Includes one unswitched AC power outlet and Cable Pass-Through Bracket for up to four AV cables
Unique, split-ring bracket design allows cables to be installed or serviced from the top of the enclosure, after it’s installed
New US model features a 12 A circuit breaker, an attached 9.5' power cord, and two 2' US AC outlet to power optional AV equipment and other devices
Versions available with AC power for the US, Europe, and other world markets
Simple, integrated clamp system secures the enclosure to the furniture surface with common hand tools
Optional Retractor and AAP™ AV Connectivity Modules Bracket Kit also available
All Features

Includes one unswitched AC power outlet and Cable Pass-Through Bracket for up to four AV cables

Cable Cubby 222 US shown with optional AV connectivity modules

Cable Cubby 202 shown with optional AAP AV Connectivity Modules

Cable Cubby 222 US features an attached 9.5' power cord and two outlets, each on a 2' cord, for powering optional AV equipment and other devices

Magnetic catch holds the lid open in any orientation

Integrated clamp system secures the enclosure with common hand tools

Cable Cubby 202 Retractor Bracket 70-1043-02

An error occurred. Please try again later.

Previous Next

(Shown with Optional Extron Products)

Image Gallery 360° view

Interactive Overview

AutoDesk Revit

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Cable Cubby 202

Provide a modular, configurable, and furniture-mountable enclosure that shall support an AC power module and combination of AV cables and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to four AV cables, or
  2. Up to two AV connectivity plates, or
  3. Up to three cable retraction modules
2. The device shall include modules and mounting frames to support AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, mounting to the left of an AC power module
  2. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one AC power outlets
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. US AC shall include an opening for one MAAP – Mini Architectural Adapter Plate, such as a momentary switch or USB pass-through connector; sold separately
  3. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  4. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  5. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
3. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black powder coat finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a magnet catch, facilitating use of the enclosure in both horizontal and vertical mounting operations
4. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize the dog leg clamp mechanism
    3. The clamps shall secure the enclosure to the furniture with common hand tools
    4. The clamps shall allow for removal of the enclosure from the furniture with common hand tools
5. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
6. Approved device shall be the Extron Cable Cubby 202; no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

Cable Cubby 202 -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.