DTP2 T 202 FB

DTP2 T 202 FB

1. Provide a two input twisted pair transmitter designed to mount in a variety of floor boxes that shall support the long distance distribution of video, audio, and control over a shielded CATx cable.
   1. Floor box mountable transmitter for the transmission of DisplayPort, HDMI, audio, and control
   2. Video input requirements
      1. Shall provide one (1) DisplayPort input for digital video signals
         1. SST – Single Stream Transport data rates up to 21.6 Gbps
      2. Shall provide one (1) HDMI inputs for digital video signals
         1. HDMI 2.0b specifications include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
      3. Shall support digital video resolutions up to 3840x2160/60 @ 4:4:4 chroma sampling
   3. Audio input requirements
      1. Shall support embedded digital audio on DisplayPort input
      2. Shall support embedded digital audio on HDMI input
      3. Shall provide a dedicated analog audio input connection
         1. One (1) 3.5 mm stereo mini jack for audio
   4. Video output requirements
      1. Shall provide one (1) RJ-45 for connection to an Extron DTP®-enabled product
      2. Shall be configurable for sending digital video, audio, and bidirectional RS-232 and IR signals to an HDBaseT™-enabled display
   5. Switching requirements
      1. Provide automatic switching between input sources
         1. Automatically switch to the active input
         2. Provide a configurable switching priority when multiple inputs are active
            1. High to low: highest numbered input has priority
            2. Low to high: lowest numbered input has priority
            3. numbered input has priority
   6. CATx cable transmission requirements
      1. Shall provide signal transmission distance capability of 330 feet (100 meters) for all supported video resolutions using a shielded CATx cable
      2. Shall support video, audio, and control over a single shielded CATx cable
      3. Shall actively buffer DDC channels
   7. EDID requirements
      1. Shall provide automatic EDID management between connected devices
         1. Provide a set of pre-stored EDID files
         2. Support capture of EDID from any connected display
         3. Support user uploading of custom-generated EDID files
         4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to any input connection
   8. HDCP requirements
      1. Shall be HDCP 2.3 compliant
      2. Shall provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
      3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
      4. Shall provide real-time verification of HDCP status for each digital video input
         1. Readable through front panel LED
         2. Electronically accessible over RS-232 or USB connection
   9. Audio requirements
      1. Shall provide analog stereo audio embedding
      2. Shall support multiple embedded audio formats
      3. Shall support audio transmission over shielded CATx up to 330 feet (100 meters)
      4. Shall support embedded HD lossless audio formats
   10. Communications requirements
       1. Shall support bidirectional RS-232 communication pass-through
       2. Shall support bidirectional IR pass-through
       3. Shall support EDID and HDCP transmission
   11. Control/Remote – RS-232 and IR pass-through over shielded CATx requirements
       1. Shall provide connection for AV device control
          1. One (1) 5-pole captive screw: RS-232 or IR pass-through to DTP-enabled product
   12. Control/Remote – switcher control requirements
       1. Shall provide connections for remote switcher control
          1. One (1) 3-pole captive screw: RS-232
       2. Shall provide alternatives for configuration and operation
          1. Product configuration software connected via USB
          2. Serial commands sent over RS-232 and USB connection
   13. Power requirements
       1. Shall accept remote power from a DTP2-enabled product
       2. Shall accept local power
       3. Shall provide DIP switch for selection to provide power to a connected DTP2 receiver
   14. General requirements
       1. Shall include a USB configuration port for data access and firmware updates
       2. Shall provide directly readable real-time verification of signal flow and operation
          1. RJ-45 signal and link status LEDs
          2. Power status LED
          3. Auto-switching selection status LED
          4. Signal presence and HDCP status LEDs for active inputs
       3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
       4. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       5. Shall be designed to mount in floor boxes from OBO Bettermann – GB2 and GB3 slots, MK by Honeywell, Electraplan, and PUK
       6. Shall be equipped with an external universal AC power supply capable of supporting 100-240 VAC, 50/60 Hz power
       7. Shall meet regulatory compliances
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS and WEEE
       8. Shall provide at least three (3) years parts and labor warranty
       9. Shall be compatible with other DTP-enabled products
   15. Approved device shall be the Extron DTP2 T 202 FB (60-1586-52); no alternates or equals