DTP CrossPoint 84

DTP CrossPoint 84 IPCP MA 70

1. Provide an 8x4 scaling presentation matrix switcher that shall support up to eight inputs and four outputs for matrix switching of HDMI sources, one digital audio expansion port, one integrated Extron IPCP Pro 350 control processor, plus additional support for signal extension over shielded CATx cable and audio digital signal processing.
   1. Rack-mountable matrix switcher for HDMI and DTP® sources and associated digital and analog audio, plus AV system control, signal extension over shielded CATx cable, and audio digital signal processing
      1. Video Input Requirements
         1. Provide video input connections
            1. Six HDMI
            2. Two RJ-45 for video from Extron DTP twisted pair transmitters
               1. Shall be configurable for compatibility with Extron DTP transmitters or DTP-enabled products
               2. Shall be configurable for compatibility with Extron XTP® CrossPoint® matrix switchers
         2. Support 4K and UHD signals at all inputs
         3. Provide image adjustments for the DTP outputs, including brightness, contrast, color, tint, detail, H/V positioning, and sizing
         4. Provide storage and recall of video parameters and picture settings when activated for the scaled DTP outputs
            1. Automatic memories for each video input
               1. Save video settings and picture adjustments without user intervention
               2. Automatically recall settings when the same video rate is encountered
               3. The user may selectively enable or disable automatic memories
            2. Manual user presets
               1. Save picture adjustments
               2. User presets may be saved and recalled using front panel controls
               3. User presets may be saved and recalled electronically via Ethernet, RS-232, or USB connection
            3. Manual input presets
               1. Save video settings and picture adjustments
               2. Input presets may be saved and recalled electronically via Ethernet, RS-232, or USB connection
         5. Support HDMI specifications including data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
         6. Provide automatic cable equalization for each digital input to 100 feet (30 meters) at 1080p/60 with 8-bit color when used with Extron HDMI Pro cables
         7. Provide automatic cable equalization for each digital input to 50 feet (15 meters) at 4K/30 and 2560x1600 @ 60 Hz resolutions when used with Extron HDMI Pro cables
         8. Support video transmission over shielded CATx up to 330 feet (100 meters)
      2. Video Output Requirements
         1. Provide video output connections
            1. Two HDMI
            2. Two RJ-45 for video to Extron DTP twisted pair receivers
               1. Shall be configurable for compatibility with Extron DTP receivers or DTP-enabled products
               2. Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to Extron XTP CrossPoint matrix switchers
               3. Shall be configurable for sending digital video and embedded audio, plus bidirectional RS-232 and IR signals to HDBaseT-enabled displays
         2. Provide a range of selectable scaled DTP output rates from 640x480 to 1920x1200, including 1080p/60 and 2048x1080p/60
         3. Support 4K and UHD signals at both HDMI outputs
         4. Provide independent scaling for each DTP output
         5. Provide aspect ratio control for each scaled DTP output
            1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
            2. When in FOLLOW mode, the video image shall always preserve the aspect ratio of the input signals without distortion
         6. Provide internal test patterns for the scaled DTP outputs to facilitate system setup and calibration
         7. Support muting of one or all outputs at any time
         8. Support automatic muting of video and sync output when no video signal is present
            1. Provide a choice to generate a blue screen or a black screen before disabling sync
            2. Provide a configurable timeout period before disabling sync
            3. The user may selectively enable or disable automatic muting of sync output
         9. Support the connection of DVI displays that do not recognize HDMI-specific formats
            1. Automatically enable or disable embedded TMDS audio and InfoFrames
            2. Automatically set the correct color space
         10. Support video transmission over shielded CATx up to 330 feet (100 meters)
         11. Provide automatic reclocking of HDMI video signals at each HDMI output
      3. Switching Requirements
         1. Provide video and audio matrix switching between any input and any output
            1. Support incoming 4K and UHD signals at all HDMI and DTP inputs
            2. Support routing of 4K and UHD signals to both HDMI outputs
         2. Provide storage and recall of input and output ties
            1. Save video and audio ties between inputs and outputs
            2. Global presets may be recalled using front panel controls
            3. Global presets may be saved and recalled electronically via Ethernet, RS-232, or USB connection
         3. Provide the ability to view which inputs and outputs are actively connected
      4. EDID Requirements
         1. Provide automatic EDID management between connected devices
            1. Provide a set of pre-stored EDID files
            2. Support capture of EDID from any connected display
            3. Support user uploading of custom-generated EDID files
            4. Support assignment of pre-stored, captured, or custom uploaded EDID file for each input connection
      5. HDCP Requirements
         1. The unit shall be HDCP compliant
            1. Provide authentication and maintain continuous verification of HDCP key exchange with connected sink devices
            2. Provide authentication and maintain continuous verification of HDCP key exchange with connected source devices
            3. Provide the option to disable HDCP processing at any HDMI input connection when passing unencrypted content
            4. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
               1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
               2. When disabled, the output shall be muted
         2. Provide real-time verification of HDCP status for each HDMI input and output
            1. Electronically accessible over Ethernet, RS-232, or USB connection
      6. Audio Requirements
         1. Provide audio input connections
            1. Support embedded audio on six HDMI connectors
            2. Support embedded audio on two RJ-45 connectors
            3. Support six stereo, line level, balanced or unbalanced signals on six, 5-pole, 3.5 mm captive screw connectors
            4. Support four mono, microphone or line level, balanced or unbalanced signals with +48 volt phantom power on four, 3-pole 3.5 mm captive screw connectors
         2. Provide audio output connections
            1. Support embedded audio on two HDMI connectors
            2. Support embedded audio on two RJ-45 connectors
            3. Support four stereo line level, balanced or unbalanced signals with independent output level control on four, 5-pole 3.5 mm captive screw connectors
            4. Support S/PDIF digital audio signal on one RCA connector
            5. Support one mono speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
         3. Provide mono amplification for high impedance speaker systems
            1. Support one mono speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
            2. Provide a total of 100 watts rms output power into a 70 volt load, measured at 1 kHz with 0.1% THD
            3. Provide a THD+N measurement of less than 0.1% measured at 3 dB below clipping
            4. Provide a signal-to-noise ratio of greater than 90 dB measured from 20 Hz to 20 kHz, unweighted
            5. Utilize an efficient Class D amplifier design
            6. Provide Class D Ripple Suppression technology
            7. Shall be convection cooled and operate without fans
            8. Provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain with a slow attack and fast release to eliminate clipping distortion
            9. Provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
         4. Provide 64-bit floating point DSP engine
            1. Support 32-bit and 64-bit processing algorithms
            2. Provide a maximum, deterministic latency of 4.5 ms from input to output
            3. Provide additional, deterministic latency of 2 ms when Virtual Path routing is used
         5. Support embedding of any analog audio input signal onto the matrix video outputs
         6. Support extraction of two-channel PCM HDMI audio signals to the analog stereo outputs, or route embedded multi-channel bitstream audio to the HDMI outputs
         7. Support de-embedding, processing, and re-embedding of two-channel PCM HDMI audio signals onto the HDMI outputs
         8. Support mixing of program audio and mic/line audio signals
         9. Support mic audio mixed with program audio onto the HDMI/DTP outputs, variable audio outputs, S/PDIF audio output, and amplified audio output
         10. Provide the capability to break two-channel audio away from its corresponding video signal and route to the audio outputs, allowing the audio and video signals from one source to be switched to different destinations
         11. Provide adjustable, automatic ducking of program audio when a signal is detected on the microphone input
             1. Program audio shall automatically ramp up to reach the original volume level when audio is no longer detected on the microphone input
         12. Support audio transmission over twisted pair up to 330 feet (100 meters)
      7. Expansion Port Requirements
         1. Provide a digital audio expansion port for bidirectional signal routing between the matrix switcher and a connected Extron DMP 128 Digital Matrix Processor
         2. Support 8 incoming signals and 16 outgoing signals
         3. Provide uncompressed digital audio at 48 kHz sampling rate with 24-bit resolution
      8. DSP Configuration Software Requirements
         1. Shall support PC-based DSP configuration software, allowing flexible control of the integrated digital signal processing
            1. Shall provide a Live mode for real-time control of parameters without compiling and file uploading to matrix switcher
            2. Shall provide an Emulate mode for offline configuration
            3. Shall provide single window view of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing
            4. Shall provide setup and configuration of digital signal processing tools including, but not limited to: Filters (high pass, low pass, bass, treble, and parametric EQ); Dynamics processing (AGC, compressor, limiter, noise gate); Delay processing; Ducking processor; Loudness processor; and multiple gain stages
            5. Shall provide cut and paste editing between processing blocks
            6. Shall provide matrix routing with integrated mix point gain adjustment between inputs, outputs, virtual sends, virtual returns, expansion inputs, and expansion outputs
            7. Shall provide a library of pre-designed processor settings for inputs and outputs with user-customizable parameters
            8. Shall provide 32 Group Master controls for consolidation of up to 28 individual gain or mute control members of the same type into one point of control
            9. Shall provide Soft Limits settings to define upper and lower control limits on Group Masters for use with external controls
            10. Shall provide 32 Presets for recall of any processing block setting, level setting, or audio routing; presets shall be saved for the entire system, or any selected partial groups of inputs, outputs, mix points, and DSP blocks
            11. Shall provide real-time metering of levels within each Input Gain, AGC, Compressor, Limiter, Noise Gate, and Output Volume processing block in Live mode
            12. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
            13. Shall provide keyboard-based navigation of configuration software utilizing directional controls, keyboard shortcuts, and spreadsheet software-style commands
            14. Shall provide file saving in both Live and Emulate mode
            15. Shall provide file upload in both Live and Emulate mode
            16. Shall provide configuration and file saving of the matrix switcher and a linked, compatible Extron digital matrix processor from a single configuration software session
      9. Integrated Control Processor Requirements
         1. Provide AV system control connections
            1. Three RJ-45: 10/100/1000Base-T Ethernet
               1. Shall support connection of Extron TouchLink® Pro touchpanels and other network controlled devices
               2. Shall act as a three port unmanaged network switch
            2. Two 3-pole captive screw: RS-232, configurable for unidirectional or bidirectional control of AV system components
            3. One 5-pole captive screw: RS-232/RS-422/RS-485, configurable for unidirectional or bidirectional control of AV system components
            4. Two IR/serial ports on one 5-pole captive screw: IR (using an IR emitter) or unidirectional RS-232 for control of AV system components
            5. Four low voltage relays on one 6-pole captive screw: configurable for controlling lighting, controlling screens, or other device functions
            6. Four digital input/output ports on one 5-pole captive screw: configurable for use as an interface with devices such as sensors, switches, LEDs, and relays
            7. One eBUS® port on a 4-pole captive screw for connecting to eBUS devices
         2. Shall support the following protocols: ICMP (ping), IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH
         3. Shall support a Web-based AV resource management application that provides a means to manage, monitor, and control AV equipment
         4. Provide an internal real-time clock with a 30-year backup battery that is used to keep track of the date and time
         5. Shall include an Extron LinkLicense® for use of third party devices as primary control interfaces
         6. Provide front panel LED activity indicators for RS-232 status, RS-232/RS-422/RS-485 status, IR/serial status, digital I/O status, relay status, eBUS status, and network status
         7. Shall support control system synchronization to allow users to retain and recover configured endpoints in case of network or power failure
         8. Shall be configured using Extron Global Configurator® Plus or Extron Global Configurator Professional with support for the following:
            1. Provide support for up to eight configurable Extron TouchLink Pro touchpanels
            2. Provide support for up to eight configurable eBUS button panels
            3. Provide remote monitoring and control via Ethernet
            4. Provide the ability to create E-mail notifications
            5. Provide multiple levels of password protection
            6. Provide the ability to create schedules and monitors
            7. Support up to 32 Ethernet-controllable AV devices
            8. Support local variables and conditional logic
            9. Support grouping of multiple Extron IP Link® Pro control processors to function as one when configured with Global Configurator Professional
         9. Security Requirements
            1. Support SFTP and SSH for secure communication between the control processor and a TouchLink Pro touchpanel or Network Button Panel
            2. Support HTTPS and SSH for secure communication between the control processor and Extron Control App
            3. Support HTTPS for secure communication between the control processor and Extron Control for Web
            4. Support SSH for secure communication between the control processor and controlled device for programmed systems
            5. Support SFTP and SSH for secure communication between the control processor and the configuration or programming software
            6. Provide the option to modify administrator and user credentials
            7. Support security updates to maintain network health
            8. Require that a Secure Socket Layer (SSL) Certificate is installed to maintain system confidentiality and data integrity
            9. Support the installation of an owner furnished certificate with the following properties:
               1. Certificates shall include x.509 support
               2. Certificates shall include public / private key exchange
               3. Certificates shall support PEM encoding
            10. Extron shall furnish documentation that describes all supported network ports and services
      10. Control/Remote – RS-232 and IR Pass-Through Over Shielded CATx Requirements
          1. Provide connections for AV device control
             1. Two 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair transmitters
             2. Two 5-pole captive screw: RS-232 or IR pass-through to DTP twisted pair receivers
          2. Support RS-232 and IR transmission over shielded CATx up to 330 feet (100 meters)
      11. Control/Remote – Matrix Switcher Requirements
          1. Provide connections for remote matrix switcher control
             1. RJ-45: 10/100Base-T Ethernet
             2. 3-pole captive screw: RS-232
             3. Mini USB-B: USB 2.0
          2. Provide alternatives for configuration and operation
             1. Front panel controls
             2. Built-in Web pages accessible using a standard Web browser via Ethernet connection
             3. Product configuration software connected via Ethernet or USB
             4. Serial commands sent over Ethernet, RS-232, or USB connection
          3. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      12. General Requirements
          1. Provide real-time verification of signal flow and operation from DTP transmitter or DTP receiver
             1. Directly readable on RJ-45 signal and link LEDs
          2. Shall be compatible with all Extron DTP Series models, DTP-enabled products, and Extron XTP CrossPoint matrix switchers
          3. Shall be compatible with CATx shielded twisted pair cable, and Extron XTP DTP 24 shielded twisted pair cable
          4. Shall provide remote power to two DTP transmitters and two DTP receivers over the shielded CATx connections
          5. Shall provide power to external peripheral devices on each HDMI output
          6. Enclosure shall be rack-mountable, full rack width, and 2RU in height
          7. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
   2. Approved device shall be the Extron DTP CrossPoint 84 IPCP MA 70 (part number 60-1368-13A); no alternates or equals