Product Home
Fiber Optics
Fiber Optic Bulk Cables
Fiber Optic Extenders Universal Switching Transmitters DisplayPort Extenders HDMI Extenders DVI Extenders RGB and HD Component Extenders 3G-SDI Extenders Standard Definition Video USB Extenders Accessories Fiber Optic Switchers Fiber Optic Matrix Switchers Fiber Optic Audio and Control Products Fiber Optic Connectors and Accessories Fiber Optic Cable Assemblies
SM P
OM4 MM P SM P

Pro

SM P

Bend-Insensitive Duplex Singlemode Fiber - Plenum

Key Features

Bend-insensitive singlemode fiber
OFNP plenum-rated jacket
Durable duplex zip-cord cable construction
Standard 2 mm duplex fiber optic cable for easy termination
All Features

Image Gallery

Interactive Overview

A&E Specifications

This bulk cable product is not certified for use in most countries in Europe. Please refer to the product specifications tab for a complete list of affected countries.

Overview
Video
Description
Specifications
Diagram
Panel Drawing
Downloads

Overview

Extron SM P singlemode fiber is available as a plenum rated bulk duplex fiber cable on a 2 km roll. The SM P is a bend-insensitive fiber featuring a tight bend radius to minimize bending loss and simplify installation. Singlemode fiber's low-loss provides extreme performance to transmit AV signals over very long distances up to 30 km or 18.75 miles.

Video

Description

Specifications

Diagram

Panel Drawing

Downloads

SM P/2K

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable
1. Duplex singlemode fiber optic cable for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be unterminated at both ends
  2. Shall be compatible with Extron QLC SM Quick LC Fiber Optic Connectors for field termination
  3. Shall be compatible with the Extron Fiber Optic Termination Kit
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a two (2) kilometer (6,562 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron SM P/2K (part number 22-223-02), no alternates or equals

SM P/2K

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable
1. Duplex singlemode fiber optic cable for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be unterminated at both ends
  2. Shall be compatible with Extron QLC SM Quick LC Fiber Optic Connectors for field termination
  3. Shall be compatible with the Extron Fiber Optic Termination Kit
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a two (2) kilometer (6,562 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron SM P/2K (part number 22-223-02), no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

SM P -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.