Product Home
Architectural Connectivity
Cable Cubby Series
Power Modules Retractor Modules Installation Accessories AVEdge Accessories USB AV Connectivity Modules USB Power Modules Flex55 Enclosures Frames Modules - Power Modules – Pass-through Modules – Active Cable Cubby Enclosures with Control Cable Cubby TouchLink Pro Touchpanels Cable Cubby Button Panels AC Power Modules Retractor Modules Touchpanel Installation Accessories Button Panel Installation Accessories Cable Cubby Accessories HSA - Hideaway Surface Access Enclosures AAP / MAAP Modules AV Connectivity Module Selector Cable Cubby Builder Connectivity Builder AV Connectivity Mounting Frames Furniture Mount - AVEdge Furniture Mount – Cable Cubby Series Furniture Mount – Hideaway Surface Access Furniture Mount – Surface Mount Table Mount Kits Wall Mount – US Gang Wall Mount – Decorator-Style Wall Mount – EU/MK Rack Mount Floor Mount Wallplates Decorator-style Wallplates with Pass-through Connectors US-Gang Wallplates with Pass-through Connectors EU/MK Wallplates with Pass-through Connectors AV Connectivity Accessories
Cable Cubby 700
Cable Cubby 100 Cable Cubby 1202 Cable Cubby 1252 MS Cable Cubby 1402 Cable Cubby 202 Cable Cubby 500 Cable Cubby 650 UT Cable Cubby 700 Cable Cubby Drawer Cable Cubby F55 Cable Cubby F55 Edge Cable Cubby F55 UT

Pro

Cable Cubby 700

Cable Access Enclosure for AV Connectivity, Remote Control, and Power

Key Features

Accommodates one AC or AC+USB power module, plus six Retractor modules, eight AV cables, or four AAP™ AV Connectivity Modules
Patented modular design for fast assembly and serviceability
Retractor Trim Kit, Cable Pass-Through bracket, and AAP bracket included; Retractor modules, cables, and AAP modules sold separately
Retractor Trim Kit holds three Retractor or Retractor XL cable retraction modules
Optional Retractor cable retraction system supports most AV and data signal types
AC Power and AC+USB power modules are available for US, Europe, and other major world markets
- AC+USB 200 Series power modules feature up to two AC outlets and two USB Type‑A outlets
- AC+USB 300 Series power modules feature up to two AC outlets, one USB Type‑C^®, and one USB Type‑A outlet
All Features

Cable Cubby 700 complements installations in high end conference rooms and board rooms

Cable Cubby 700 US AC features AC 104 US module which includes an attached power cord, two 2’ US AC cables, and a 12A reset button

Cable Cubby 700 accommodates one AC or AC+USB power module, plus six Retractor modules, eight AV cables, or four AAP™ AV Connectivity Modules

Cable Cubby 700 is compatible with optional CCB 30 module for remote control to Extron switchers or control modules with contact closure ports

AC Power and AC+USB power modules are available for US, Europe, and other major world markets

Available CableCover cable bag for improved cable management and aesthetics

Choice of black anodized or brushed aluminum finish to match any décor

Included brackets accommodate six Retractor modules, eight AV cables, or four AAP modules

An error occurred. Please try again later.

Previous Next

(Shown with Optional Extron Products)

Image Gallery 360° view

Interactive Overview

AutoDesk Revit

Cable Cubby 700

Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to eight AV cables, or
  2. Up to four AV connectivity plates, or
  3. Up to six cable retraction modules
2. If AC power is not required, the device shall then support
  1. Up to sixteen AV cables, or
  2. Up to nine AV connectivity plates, or
  3. Up to six cable retraction modules, plus up to eight AV cables or three AV connectivity plates
3. The device shall include modules and mounting frames to support AC or AC-plus-USB power, AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, with no fewer than three installer-determined height positions
  2. The modules shall be positionable within the enclosure, mounting to the left or right of an installed AC power module or supplemental connectivity module
  3. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
  4. AC-plus-USB power modules shall also be available for world markets
    1. AC+USB power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. AC-plus-USB power modules shall provide two USB power outlets
      1. USB power outlets shall provide 5 volts Direct Current and up to 2.1 amps, or 10.5 watts of power
      2. Total available current shall be shared by the two USB outlets
      3. An external, 12 volt DC, 1 amp power supply shall be included for the USB power outlets
      4. The external power supply shall be energy efficient and highly reliable, with a demonstrated mean time between failures of more than one million hours
  5. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  6. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  7. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
4. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black anodized or brushed aluminum finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a damper that controls the speed of the lid as it moves within the enclosure
5. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize a lever-and-cam mechanism
    3. The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
    4. The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
6. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
7. Approved device shall be the Extron Cable Cubby 700; no alternates or equals

Cable Cubby 700

Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to eight AV cables, or
  2. Up to four AV connectivity plates, or
  3. Up to six cable retraction modules
2. If AC power is not required, the device shall then support
  1. Up to sixteen AV cables, or
  2. Up to nine AV connectivity plates, or
  3. Up to six cable retraction modules, plus up to eight AV cables or three AV connectivity plates
3. The device shall include modules and mounting frames to support AC or AC-plus-USB power, AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, with no fewer than three installer-determined height positions
  2. The modules shall be positionable within the enclosure, mounting to the left or right of an installed AC power module or supplemental connectivity module
  3. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
  4. AC-plus-USB power modules shall also be available for world markets
    1. AC+USB power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. AC-plus-USB power modules shall provide two USB power outlets
      1. USB power outlets shall provide 5 volts Direct Current and up to 2.1 amps, or 10.5 watts of power
      2. Total available current shall be shared by the two USB outlets
      3. An external, 12 volt DC, 1 amp power supply shall be included for the USB power outlets
      4. The external power supply shall be energy efficient and highly reliable, with a demonstrated mean time between failures of more than one million hours
  5. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  6. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  7. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
4. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black anodized or brushed aluminum finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a damper that controls the speed of the lid as it moves within the enclosure
5. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize a lever-and-cam mechanism
    3. The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
    4. The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
6. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
7. Approved device shall be the Extron Cable Cubby 700; no alternates or equals

Cable Cubby 700

Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to eight AV cables, or
  2. Up to four AV connectivity plates, or
  3. Up to six cable retraction modules
2. If AC power is not required, the device shall then support
  1. Up to sixteen AV cables, or
  2. Up to nine AV connectivity plates, or
  3. Up to six cable retraction modules, plus up to eight AV cables or three AV connectivity plates
3. The device shall include modules and mounting frames to support AC or AC-plus-USB power, AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, with no fewer than three installer-determined height positions
  2. The modules shall be positionable within the enclosure, mounting to the left or right of an installed AC power module or supplemental connectivity module
  3. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
  4. AC-plus-USB power modules shall also be available for world markets
    1. AC+USB power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. AC-plus-USB power modules shall provide two USB power outlets
      1. USB power outlets shall provide 5 volts Direct Current and up to 2.1 amps, or 10.5 watts of power
      2. Total available current shall be shared by the two USB outlets
      3. An external, 12 volt DC, 1 amp power supply shall be included for the USB power outlets
      4. The external power supply shall be energy efficient and highly reliable, with a demonstrated mean time between failures of more than one million hours
  5. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  6. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  7. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
4. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black anodized or brushed aluminum finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a damper that controls the speed of the lid as it moves within the enclosure
5. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize a lever-and-cam mechanism
    3. The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
    4. The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
6. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
7. Approved device shall be the Extron Cable Cubby 700; no alternates or equals

Cable Cubby 700

Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, and cable retraction modules
1. Device shall support one AC power module plus
  1. Up to eight AV cables, or
  2. Up to four AV connectivity plates, or
  3. Up to six cable retraction modules
2. If AC power is not required, the device shall then support
  1. Up to sixteen AV cables, or
  2. Up to nine AV connectivity plates, or
  3. Up to six cable retraction modules, plus up to eight AV cables or three AV connectivity plates
3. The device shall include modules and mounting frames to support AC or AC-plus-USB power, AV cables and/or AV connectivity plates.
  1. The modules shall be positionable within the enclosure, with no fewer than three installer-determined height positions
  2. The modules shall be positionable within the enclosure, mounting to the left or right of an installed AC power module or supplemental connectivity module
  3. AC power modules shall be available for all world markets
    1. AC power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
  4. AC-plus-USB power modules shall also be available for world markets
    1. AC+USB power modules shall be UL listed and CE compliant when installed within the enclosure
    2. AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
    3. AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
    4. AC-plus-USB power modules shall provide two USB power outlets
      1. USB power outlets shall provide 5 volts Direct Current and up to 2.1 amps, or 10.5 watts of power
      2. Total available current shall be shared by the two USB outlets
      3. An external, 12 volt DC, 1 amp power supply shall be included for the USB power outlets
      4. The external power supply shall be energy efficient and highly reliable, with a demonstrated mean time between failures of more than one million hours
  5. The external power supply shall be designed and manufactured by the same entity providing the enclosure and power module
  6. The cable pass-through plate shall be a single unit
    1. The plate shall be flexible to allow the installation, removal, or replacement of cables
    2. The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
    3. The plate shall include plugs to cap cable pass-through openings that are not utilized
    4. The assembled plate, with cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
  7. The AV connectivity frame shall be a single unit
    1. The frame shall support two single-space AV connectivity plates, or one double-space AV connectivity plate
    2. The assembled frame, with AV connectivity plates and attached cables, shall install from the top of the enclosure, after it’s installed within the furniture surface
4. Device shall include an attached and fully integrated, all metal lid and bezel assembly
  1. The lid and bezel assembly shall be available in a black anodized or brushed aluminum finish
  2. Device lid shall fit entirely within the bezel
    1. When closed, the lid shall provide a full-width opening for cable pass-through
    2. When open, the lid shall articulate such that it fits within the enclosure body
    3. Device shall include a damper that controls the speed of the lid as it moves within the enclosure
5. Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
  1. An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
  2. The enclosure shall feature an integrated clamp system
    1. The clamps shall be permanently affixed to the enclosure body
    2. The clamps shall utilize a lever-and-cam mechanism
    3. The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
    4. The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
6. An Internet-accessible application for enclosure configuration and visualization shall be available
  1. Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, and cable retraction modules
  2. Application shall provide accurate depiction of power and connectivity selections
  3. Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
  4. Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
7. Approved device shall be the Extron Cable Cubby 700; no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

Cable Cubby 700 -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.