XTP SR HD 4K

XTP SR HD 4K

1. Provide an twisted pair scaling receiver that shall support the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, along with Ethernet
   1. Long distance signal extension of digital video with embedded multi-channel audio, Ethernet, and control signals over a shielded CATx cable
   2. Video output requirements
      1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
      2. Shall automatically reformat HDMI source signals for output to a connected DVI display
      3. Shall provide selectable computer and video resolutions up to 4096x2160 at 30 Hz with 4:4:4 chroma sampling
      4. Shall provide a scaler bypass mode to support unprocessed transmission of 3D, UHD 3840x2160/60 4:2:0, 4096x2160/60 4:2:0, and other formats
      5. Shall provide selectable aspect ratio control
         1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
         2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
      6. Shall support a videowall mode when used with an XTP CrossPoint matrix switcher to enable a mix of full screen and image magnification across multiple displays for configurations up to 8x8
      7. Shall support RGB and YCbCr color space formats
      8. Shall support HDMI specifications of
         1. Data rates up 10.2 Gbps
         2. Deep Color up to 12-bit
         3. 3D content
         4. HD lossless audio formats
   3. HDCP requirements
      1. Shall be HDCP 2.3 compliant
      2. Shall support authentication and maintain continuous verification of HDCP key exchange between connected devices
      3. Shall support the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
      4. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
   4. EDID requirements
      1. Shall provide automatic EDID management between connected devices
         1. Maintain continuous EDID communication with the connected source
         2. User selection of EDID from any connected display
         3. User-selection of EDID from pre-stored data files
   5. Audio output requirements
      1. Shall support multiple embedded audio formats
      2. Shall support audio de-embedding
      3. Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
      4. Shall provide one (1) female HDMI Type A connector – shared with video output
      5. Shall provide one (1) S/PDIF output
      6. Shall provide one (1) 5-pole captive screw connector for balanced/unbalanced analog audio output
      7. Shall provide capability to adjust volume
      8. Shall provide capability to mute
      9. Shall support audio only signal extension
   6. Transmission requirements
      1. Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
      2. Shall provide signal transmission over a single, shielded CATx twisted pair cable
   7. Interconnection requirements
      1. Shall provide one (1) RJ-45 twisted pair connection
      2. Shall provide interconnection between the receiver and an XTP Series transmitter or output board over one, shielded CATx twisted pair cable
   8. Ethernet extension
      1. Shall provide one (1) 10/100 Ethernet port
         1. Ethernet pass-through port to reduce the number of independent network drops
   9. AV Device Control requirements
      1. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for control pass-through
      2. Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
      3. Shall provide two (2) two-pole captive screw connectors on rear panel for relay control of room functions
   10. Control/Configuration requirements
       1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
       2. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for setup and configuration
       3. Shall allow setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel
   11. Power requirements
       1. Shall support remote powering from an XTP input board or XTP power injector
       2. Shall include an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
   12. General requirements
       1. Shall support image freeze through RS-232 or Ethernet control
       2. Shall provide internal test patterns for calibration and setup
       3. Shall provide visual signal on LED indicators located on front panel for XTP signal presence, HDCP compliance, audio signal format, and power
       4. Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
       5. Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
       6. Shall be rack and furniture mountable with optional mounting kits
       7. Shall provide Extron LockIt® HDMI cable lacing brackets
       8. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS, WEEE
       9. Shall provide at least three (3) years parts and labor warranty
       10. Shall be compatible with other devices within an XTP System for distribution and routing
   13. Approved device shall be the Extron XTP SR HD 4K (60-1524-01); no alternates or equals